Toaster Bath Bomb Mold

This is a 3D printed mold for people who make their own bath bombs and is designed to be used by hand. 

This mold comes in 2 sizes and is available in the classic 3-piece style and the hybrid/1-piece style. Both styles of molds come with a hybrid half waffle double mold so that you can add waffles to your toaster. Total pieces received will vary on the toaster waffle mold type you order.

• 3-piece mold type orders will receive 4 pieces: toaster sleeve, 2 toaster cups (top and bottom), and 1 hybrid half-waffle mold. 
  • If you order the regular size toaster, you will also receive a piece to help you tamp down your bath bomb mix into the cup piece. (We recommend putting the top piece into the cup and filling with your mix that way.)
• Hybrid/1-piece mold type orders will receive 2 pieces: 1 hybrid toaster mold, 1 hybrid half-waffle mold. 
  • If you order the regular size toaster, you will also receive a piece to help you tamp down your bath bomb mix into the mold. 

Mold colours may vary from photo.

Approximate final bath bomb size:

• Regular size: 9 cm wide  x 4 cm tall  (3.5" x 1.75"). Approximate depth (dependent on how much mix you put into the mold)  3.75 cm / 1.5".
  • Bath bomb in photo made with hybrid mold weighs approximately 115 grams / 4 oz without waffles.   (Bath bombs not included.)
  • Bath bomb in photo made with 3-piece mold weighs approximately 150 grams / 5.3 oz without waffles.   (Bath bombs not included.)
• Large size: 12 cm wide  x 5.5 cm tall  (4.7" x 2.1"). Approximate depth (dependent on how much mix you put into the mold)  6 cm / 2.4".
  • Bath bomb in photo weighs approximately 307 grams / 10.8 oz.  (Bath bombs not included.)

Molds are printed to order, so we do not offer refunds or cancellations on any orders. If you have any issues with any item, please contact us directly, and we will work with you. If you have any quality issues, please contact us directly.

Bath Bomb Not Included

This is for a mold only - bath bomb is not included.

Printing Defects

There may be slight discoloration or other printing defects on printed products. This will not affect the performance of the molds.

Cleaning

Rinse your mold under cool water and towel dry to clean mold. Never soak your molds as they can retain water. Do not place your molds in the dishwasher. PLA is susceptible to heat, so please do not use warm or hot water.

How to Use Molds

To use 3-piece designs:  Place the sleeve on the base.  Add your bath bomb mixture.  Place the plunger on top, and then simply press down hard. You can either push the top and bottom piece out of the sleeve by hand, and then unmold, or you can use the plunger to push the mold pieces out.  Wipe away any mixture on the inside of the pieces before making the next bath bomb.

To use 1-piece (hybrid) designs: Place bath bomb mix into mold. Scrape off excess mixture so that the mix is flat (and will be flat when unmolded). Flip mold onto a hard surface (e.g. baking sheet) and lift mold off of bath bomb. If the mold does not lift off, tap the mold with a spoon or other utensil to tap the bath bomb out of the mold

Mold Material

Our molds are made of PLA which is derived from renewable resources like corn starch or sugar cane.  To clean your mold, rinse under cool water and towel dry.  PLA is heat sensitive and can retain water, so molds should never be put in the dishwasher or soaked, and should not be rinsed with warm or hot water.