Chill Pill Bath Bomb Mold

This is a 3D printed mold for people who make their own bath bombs and is designed to be used by hand. 

The mold contains 3 pieces: 2 mold cups and 1 mold sleeve. Colour of mold may vary from picture.

Finished weight and size of mold is dependent on how much mix you put into the mold. Approximate size of finished bath bomb is 10 cm Wide x 5 cm Tall / 4" Wide x 2" Tall, Bath bomb in photo weighs approximately 160 g / 5.5 oz; (bath bomb not included).
 

Our molds are made of PLA which is derived from renewable resources like corn starch or sugar cane.  To clean your mold, rinse under cool water and towel dry.  PLA is heat sensitive and can retain water, so molds should never be put in the dishwasher or soaked, and should not be rinsed with warm or hot water.

Molds are printed to order, so we do not offer refunds or cancellations on any orders. If you have any issues with any item, please contact us directly, and we will work with you. If you have any quality issues, please contact us directly.

To use:  Place one mold cup inside the sleeve.  Add your bath bomb mixture.  Place the other mold cup on top, and then simply press down. You can either push the mold cups out of the sleeve by hand, and then unmold, or you can use the plunger to push the mold pieces out.  Tap each side of the mold to "release" the bath bomb, then unmold. Wipe away any mixture on the inside of the pieces before making the next bath bomb.

Bath Bomb Not Included

This is for a mold only - bath bomb is not included.

Printing Defects

There may be slight discoloration or other printing defects on printed products. This will not affect the performance of the molds.

Cleaning

Rinse your mold under cool water and towel dry to clean mold. Never soak your molds as they can retain water. Do not place your molds in the dishwasher. PLA is susceptible to heat, so please do not use warm or hot water.